iQ Open Frame
The iQ Open Frame 2 and 4 Post Rack is designed to accommodate server & active equipment while still providing a high cable capacity cable management solution. The iQ vertical cable management channels can be fitted to 2 and 4 post open frames both front & rear, as well as being bayed together with another 2-post or 4-post rack. A full height cable tray can also be fitted providing another form of cable management within the 4-post rack.
There are several cable management options available utilising the Racktech T-Finger design. The vertical cable managers are available in widths of 150mm, 300mm and 400mm.
iQ Open Frame
RU | Height | Width | Depth | Frame | Description |
---|---|---|---|---|---|
38RU |
1748 | 515 | 145 | iQOF3801 | iQOF3801 – 38RU IQ Open Frame |
45RU |
2150 | 515 | 145 | iQOF4501 | iQOF4501 – 45RU IQ Open Frame |
52RU |
2462 | 515 | 145 | iQOF5201 | iQOF5201 – 52RU IQ Open Frame |
Cable Management
The T-Finger Vertical Cable Management System is designed to handle high density cabling for termination or patching applications.
This system ensures neat cabling as well as adherence to bend radius requirements. A hinged door cover conserves any unsightly cables and has the ability to swing left or right for ease of cable installation.
The T-Fingers on our managers are mounted in 2RU increments and can be removed to allow the bending and entry of larger cable bundles via the top or bottom, left or right. The fingers are available in 2 (two) lengths – 93mm and 146mm. See pages 30-33 for cable management
Horizontal Cable Management
- Supports and ensures bending radii are met
- Routing of cable to maximise capacity
Note: Vertical cable managers can be easily mounted back to back utilising different sizes available.
93mm T-Fingers
RU | Part Number | Description |
---|---|---|
1RU | iQOF9509 | T-Finger Horizontal 1RU 130D |
2RU | iQOF9502 | T-Finger Horizontal 2RU 130D |
4RU | iQOF9512 | T-Finger Horizontal 4RU 130D |
146mm T-Fingers
RU | Part Number | Description |
---|---|---|
1RU | iQOF9509-150 | T-Finger Horizontal 1RU 130D |
2RU | iQOF9502-150 | T-Finger Horizontal 2RU 183D |
4RU | iQOF9512-150 | T-Finger Horizontal 4RU 183D |
Vertical Cable Management
- Designed to handle high density cabling, for termination or patching applications
- Refer to Cable Capacity Table on page 19
Note: Vertical cable managers can be easily mounted back to back utilising different sizes available.
93mm T-Fingers
RU | 150mm | 300mm | 400mm | Description |
---|---|---|---|---|
38RU | IQOF3820 | IQOF3840 | IQOF3850 | 93mm T-Fingers – 38RU Vertical Cable Management |
45RU | IQOF4520 | IQOF4540 | IQOF4550 | 93mm T-Fingers – 45RU Vertical Cable Management |
52RU | IQOF5220 | IQOF5240 | IQOF5250 | 93mm T-Fingers – 52RU Vertical Cable Management |
146mm T-Fingers
RU | 150mm | 300mm | 400mm | Description |
---|---|---|---|---|
38RU | IQOF3820-150 | IQOF3840-150 | IQOF3850-150 | 146mm T-Fingers – 38RU Vertical Cable Management |
45RU | IQOF4520-150 | IQOF4540-150 | IQOF4550-150 | 146mm T-Fingers – 45RU Vertical Cable Management |
52RU | IQOF5220-150 | IQOF5240-150 | IQOF5250-150 | 146mm T-Fingers – 52RU Vertical Cable Management |
iQOF9501
iQOF9503
iQOF9504
iQOF9505
Cable Supports
- Supports and ensures bending radii are met
- Allows the entry of cables within ‘the frame’
Part Number | Information | Description |
---|---|---|
iQOF9501 | Adjustable Top Water Fall Tray (Height adjustable to 60mm) | iQOF9501 – Cable Support |
iQOF9503 | Top Water Fall Support Tray (To route leads between managers) | iQOF9503 – Cable Support |
iQOF9504 | 2RU Horizontal Cable Tray (To route leads between managers) | iQOF9504- Cable Support |
iQOF9505 | Bottom Cable Tray (Used to take up the slack of leads) | iQOF9505- Cable Support |
Cable Slack Spool
Cable slack spools are used for both copper and fibre (allowing minimum bend radius) where the slack of the cable length is to be spooled inside the vertical management channels.
Part Number | Length | Description |
---|---|---|
iQOF9506 | 70 | iQOF9506 – Cable slack spool |
iQOF9507 | 140 | iQOF9507 – Cable slack spool |
iQOF9508 | 210 (For extended finger & brackets only) | iQOF9508 – Cable slack spool |
Stiffener Plate
Optional product to support open frames
Part Number | Description | Description |
---|---|---|
iQOF9513 | Used for 150mm, 300mm and 400mm (w) Managers | iQOF9513 – Stiffener plate |
Open Frame Chimney
- Used for 38RU & 45RU open frames
- Telescopic cable management chimney
- Adjustable 750mm (h) to 1270mm (h)
- Can be retro-fitted around existing cable installation
- Other sizes avilable on request
Part Number | Description | Description |
---|---|---|
iQOF9520 | Suits iQOF3820 & iQOF4520 | iQOF9520 – Open frame chimney |
Open Frame Foot Print
The adjustable joiner kit (iQOF9511) is used to join the frames together, turning a 2-post frame into a 4-post frame. The kit allows you to manually adjust the depth of the rack from 600mm to 1000mm to accommodate your equipment.